High Purity Metals and Materials

Silicon Materials

Fast, Precise, Reliable

DXL is your source when it comes to Si materials

Si Chunks

  • Purity: 99.9 - 99.9999%
  • From Industrial to Solar Grade
  • Size of chunks according to customer requirements; Fine to Large
  • Chemical/Physical properties according to customer requirements
  • For Details, inquire here!

Si Wafers

  • Prime wafers from 1" to 300mm
  • Test wafers from 1" to 300mm
  • Wafers cut to customer requirements including polishing, thermal oxidation.
  • For Details, inquire here!

Si Powder

  • Purity: 99.9 - 99.999%
  • Grain size according to customer requirements
  • Grain size distribution according to customer requirements.
  • Chemical/physical composition according to customer requirements.
  • For Details, inquire here!

Silicon Dioxide (SiO₂)

  • SiO₂ Granules
  • SiO₂ Powder
  • Purity: 99.9 - 99.999%
  • Grain and particle size according to customer requirements
  • For Details, inquire here!

Sputtering Targets

DXL offer PVD materials in the form of targets and evaporation materials. In addition to raw targets DXL provides backing plates and bonding services for all targets.

Manufacturing Techniques

Some of the many manufacturing techniques DXL is able to provide in the production of your targets:

Hot Isostatic Pressed (HIP)

Hot isostatic pressing (HIP) is a manufacturing process used to reduce the porosity of metals and influence the density of many ceramic materials. This improves the mechanical properties, workability and ceramic density.

The HIP process subjects a component to both elevated temperature and isostatic gas pressure in a high pressure containment vessel. The pressurizing gas most widely used is argon. An inert gas is used, so that the material does not chemically react. The chamber is heated, causing the pressure inside the vessel to increase. Many systems use associated gas pumping to achieve necessary pressure level. Pressure is applied to the material from all directions (hence the term "isostatic").

Electron Beam Melting

This solid freeform fabrication method produces solid metal pieces directly from metal powder with characteristics of the target material. The EBM machine reads data from a 3D CAD model and lays down successive layers of powdered material. In this way it builds up the model. These layers are fused together utilizing a computer controlled electron beam

Fabricated Products

Over the years, DXL has formed alliances with strategic vendors to meet the specific needs of its customers

We enjoy a challenge, and are willing to work with our customers to develop new and superior products. No matter how difficult your needs, DXL is the source to meet your requirements.


We can offer materials rolled down to .0003" thickness. Surface finishes down to 2 micro-inch are possible with our special polished rolling equipment.

  • Plates
  • Sheets
  • Strips
  • Ribbons
  • Foil

We offer wire in different profiles and materials.

  • flat
  • round
  • square
  • hexagonal
Cut Pieces and Sliting

We can provide ribbon, strips and wire custom cut to length from .050" to 48" long with minimal or no burrs with excellent flatness.

We can slit materials as narrow as .020" dep ending on the thickness and widths up to 6".

up to 1200°C argon atmosphere furnace
up to 1650°C high temperature hydrogen atmosphere furnace
up to 2300°C hydrogen atmosphere sintering furnace for specialized applications